| Arbor size: 15.9 mm | Weight: 193 kg |
| Blade Tilt: 45 (left)° | Working height: 864 mm |
The SawStop PCS (Professional Cabinet Saw) is the 10″ cabinet saw that SawStop aims at serious hobbyists and small professional shops. It sits between the Contractor Saw and the heavier Industrial Cabinet Saw, and it is probably the saw most people picture when they think of SawStop.
Like all SawStop saws, the PCS runs a small electrical signal through the blade. When the blade touches skin, the change in signal fires an aluminium brake into the blade, which stops it within a few milliseconds and drops it below the table. In most cases this means a small cut instead of a lost finger.
The downside is that each activation destroys the brake cartridge and usually the blade, so it costs you a new cartridge and blade. A diagnostic system checks before each start that the cartridge is installed and the saw is ready to respond. The same technology is also used in the Festool TKS 80, as Festool’s parent company owns SawStop.
Tip: When cutting conductive material, like aluminium or very wet wood, use the bypass mode so the brake doesn’t fire. A dado stack also needs its own, separate brake cartridge and table insert.
The PCS is sold with a 1.75 HP motor for 120 V or a 3 HP motor for 230 V single phase. Both drive the arbor with two V-ribbed belts. The blade tilts to the left up to 45°, with a maximum depth of cut of 3-1/8″ (79 mm) at 90° and 2-1/4″ (57 mm) at 45°.
The cast iron table is 20″ x 27″, or 44″ x 27″ (1118 x 686 mm) with the extension wings. The rip capacity depends on the fence: the PCS comes with a 30″ Premium fence or a 36″ or 52″ Professional T-Glide fence.
Dust collection is one of the PCS’s strong points. A shroud around the blade inside the cabinet leads to a 4″ port, and the included blade guard has its own dust port. The guard and the riving knife mount without tools, and the zero clearance insert has a steel core.
All of this makes the PCS a very well built cabinet saw, but it is also expensive compared to cabinet saws without finger detection, and the replacement cartridges add to the cost. For many people that is a price worth paying, especially in shops where several people use the saw.
Know a useful link or video for the SawStop PCS Professional Cabinet Saw? Send me a message, and I'll update the page with your info.
Reviews and Videos
SawStop PCS table saw review
youtube.com
In-depth review of the PCS by Toolamanjaro.
The Hater's Guide to SawStop
youtube.com
731 Woodworks takes an honest look at the downsides and common criticism of SawStop saws.
SawStop 1.75 HP PCS: likes and dislikes
youtube.com
Bethesda Woodworks shares what he likes and dislikes about the 1.75 HP PCS.
Assembling a SawStop PCS 3 HP with tips
youtube.com
Christcross Crafts assembles the 3 HP PCS and shares tips along the way.
SawStop PCS unboxing and setup
youtube.com
Northwest Craftsman unboxes, assembles and sets up the PCS.
General
SawStop PCS product page
sawstop.com
Official product page with specifications and manuals
SawStop on Wikipedia
wikipedia.org
History of the company and how its finger detection technology works
Be the first to share your experiences with the SawStop PCS Professional Cabinet Saw
All the specs and options for the SawStop PCS Professional Cabinet Saw
| General | |
|---|---|
| Working height | 864 mm |
| Weight (standard configuration) | 193 kg |
| Total height | 864 mm |
| Total width | 838 mm |
| Motor | |
| Motor Frequency | 60 Hz |
| Extra Features and Options | |
|---|---|
| 3 HP 230 V motor | Option |
| 1.75 HP 120 V motor | Option |
| 36" Professional T-Glide fence and extension table | Option |
| 30" Premium or 52" Professional T-Glide fence | Option |
| Dust collection blade guard and riving knife | Included |
| Dado brake cartridge | Option |
| Overarm dust collection guard | Option |
| Table Saw | |
|---|---|
| Maximum Cutting Height | 79 mm |
| Maximum Ripping Width | 914 mm |
| Table Dimensions | 1118 x 686 mm |
| Saw blade | |
| Saw Blade Diameter | 254 mm |
| Tilt | 45 (left)° |
| Arbor diameter | 15.9 mm |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2026
There are no comments yet, be the first to leave one!
Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!