|Jointing width: 310 mm||Power: 2500 W|
|Max jointing depth: 3 mm||Tables length: 1605 mm|
|Type of Cutters: 4 standard or reversible blades||Fence Tilt: 90-45 °|
|Working height: 860 mm|
|Planer width: 307 mm||Power: 2500 W|
|Max depth of cut: 5 mm||Table length: 750 mm|
|Max workpiece height: 220 mm||Feed rate(s): 8m/min|
The Scheppach Plana 4.1c jointer planer is the middle one of the current Plana series, being larger than the Plana 3.1c and smaller than the Plana 6.1c ( a 5.1c version does not exist). It also has the possibility to add an optional mortising table.
It has cast iron tables. These tables can swing upwards when switching to thickness planing mode, and are held in place by an automatic spring to prevent them falling down accidentally.
It is the successor of the older Plana 4.0c. In comparison to its smaller brother, the 3.1c, it is not just bigger, but it also has 4 blades instead of 3, creating better jointing and planing results.
There are many off-brand versions of this machine that are often cheaper, but may lack some functionality (like the springs to secure the tables) and have lower build quality. Most likely they are all made in the same Chinese factory.
Know a useful link or video for the Scheppach Plana 4.1c Jointer Planer? Send me a message, and I'll update the page with your info.
Be the first to share your experiences with the Scheppach Plana 4.1c Jointer Planer
All the specs and options for the Scheppach Plana 4.1c Jointer Planer
|Working height||860 mm|
|Weight (standard configuration)||293 kg|
|Total height||860 mm|
|Total width||630 mm|
|Motor Voltage||3x 400V 1x 230V|
|Motor Frequency||50 Hz|
|Extra Features and Options|
|Jointing width||310 mm|
|Max depth of cut||3 mm|
|Tables length||1605 mm|
|Type of cutters||4 standard or reversible blades|
|Planer Width||307 mm|
|Max depth of cut||5 mm|
|Table length||750 mm|
|Max workpiece height||220 mm|
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2023