Type of machine
Jointer Planer ComboManufacturer
ScheppachDesigned in
Germany
Production status
Vintage
 Jointing width: 250 mm |
 Power: 2000 W |
 Max jointing depth: 5 mm |
Tables length: 1085 mm |
| Type of Cutters: 3 standard or reversible blades | Fence Tilt: 90-45 ° |
| Working height: 810 mm |
| Planer width: 250 mm |
Power: 2000 W |
| Max depth of cut: 2 mm |
Table length: 600 mm |
| Max workpiece height: 180 mm | Feed rate(s): 8m/min |
The Scheppach Plana 3.0c jointer planer is a combination machine that succeeded the Scheppach HMC 2600 ci. It is also essentially the same machine as the Kity 2636, which was also produced by Scheppach after it took over Kity. Just like the other machines, the Plana 3.0c had a mortising extension available.
The main differences with its predecessor are the smaller jointing width (250 vs 260 mm), but the longer planing and jointing tables, as well as significantly increased planing height. It does however lack the function to disable the feed rollers, which the HMC 2600 ci did have.
Another small change is the faster throughput rate (8m/min vs the usual 5m/min) which means you can work faster, but planing results could be slightly worse.
The jointer and planer tables are made from cast iron. Along with its heavy weight and integrated stand this makes it quite a stable and sturdy machine. The larger version of this machine is the Scheppach Plana 4.0c, and succeeded by the currently still available Scheppach Plana 3.1c.
There are several machines under different brand names that are very similar, such as the Holzmann HOB 260NL. These are most likely licensing the design from Scheppach and produced in the same (Chinese) factory.
Know a useful link or video for the Scheppach Plana 3.0c Jointer Planer? Send me a message, and I'll update the page with your info.
Be the first to share your experiences with the Scheppach Plana 3.0c Jointer Planer
All the specs and options for the Scheppach Plana 3.0c Jointer Planer
| General | |
|---|---|
| Working height | 810 mm |
| Weight (standard configuration) | 147 kg |
| Total height | 905 mm |
| Total width | 610 mm |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 Hz |
| Extra Features and Options | |
|---|---|
| Mortising table | Option |
| Wheel base | Option |
| Jointer | |
|---|---|
| Jointing width | 250 mm |
| Max depth of cut | 5 mm |
| Tables length | 1085 mm |
| Type of cutters | 3 standard or reversible blades |
| Fence tilt | 90-45° |
| Planer | |
|---|---|
| Planer Width | 250 mm |
| Max depth of cut | 2 mm |
| Table length | 600 mm |
| Max workpiece height | 180 mm |
| Feed rate(s) | 8m/min |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
There are no comments yet, be the first to leave one!
Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!