 Blade Diameter: 315 mm |
 Power: 4000 W |
 Max cutting height: 100 mm |
 Max ripping width: 900 mm |
| Sliding Table Length: 2660 mm | Max crosscut width: 3200 mm |
| Blade Tilt: 90-45 ° | Working height: 900 mm |
The SCM Minimax SC 4e (elite) is a panel saw aimed at serious hobbyists or small professional shops. According to SCM it is their #1 best selling panel saw. The Minimax ST 4e is almost the same machine, but with a spindle moulder added.
It is slightly larger and has a few more options than the Minimax SC 3c. For example, the sliding table of the SC 4e is 36 mm while the SC 3c’s table is only 27 mm wide. There are several nice touches that also make this machine an upgrade over its cheaper siblings, such as integrated folding handwheels (so you don’t have to remove them) and digital read out of the blade angle.
The Minimax SC 4e can be configured in multiple ways. The sliding table can range from 1600 to 3200mm and there are four different motors to choose from, both single and three-phase.
The scoring blade can also have a separate motor. Note that this has to be ordered from the factory and cannot be added later, unlike most other optional configurations.
Know a useful link or video for the SCM Minimax SC 4 Elite? Send me a message, and I'll update the page with your info.
Reviews and Videos
Video of the SCM Minimax SC 4e in use
youtube.com
Video of the SCM Minimax SC 4e in use. By Diamond Tools and Woodworking Machinery. With a pleasant classical tune.
Video: How to change the saw blade
youtube.com
Video showing how the saw blade is changed on the SC 4e. By Diamond Tools and Woodworking Machinery.
Detailed written Review of the SC 4e
machineriecontinental.ca
Featured Resource
A detailed written (very positive) review by Alan Holtham for the Woodworkers Institute.
General
Official page on the SCM website
scmgroup.com
Official page of the Minimax SC 4e on the SCM website
Ask questions or share your experiences with the SCM Minimax SC 4 Elite with others
All the specs and options for the SCM Minimax SC 4 Elite
| General | |
|---|---|
| Working height | 900 mm |
| Weight (standard configuration) | 473 kg |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 or 60 Hz |
| Extra Features and Options | |
|---|---|
| Short fence for angled cuts with flip-over stops | Option |
| Additional table on the sliding carriage | Option |
| Digital readout for setting the fence precisely to 1/10 mm | Option |
| Dado blade set | Option |
| Scoring blade | Option |
| Improved overhead blade guard | Option |
| Panel Saw | |
|---|---|
| Maximum Ripping Width | 900 mm |
| Sliding Table Length | 2660 mm |
| Maximum Width Crosscut Fence | 3200 mm |
| Saw blade | |
| Saw Blade Diameter | 315 mm |
| Saw Blade RPM | 4000 |
| Maximum Cutting Height | 100 mm |
| Tilt | 90-45° |
| Scoring Blade | |
| Scoring Blade Diameter | 100 mm |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
Can a 13amp extractor be wired directly into machine to operate when blade in use