The SCM Minimax SC 4e (elite) is a panel saw aimed at serious hobbyists or small professional shops. According to SCM it is their #1 best selling panel saw. The Minimax ST 4e is almost the same machine, but with a spindle moulder added.
It is slightly larger and has a few more options than the Minimax SC 3c. For example, the sliding table of the SC 4e is 36 mm while the SC 3c’s table is only 27 mm wide. There are several nice touches that also make this machine an upgrade over its cheaper siblings, such as integrated folding handwheels (so you don’t have to remove them) and digital read out of the blade angle.
The Minimax SC 4e can be configured in multiple ways. The sliding table can range from 1600 to 3200mm and there are four different motors to choose from, both single and three-phase.
The scoring blade can also have a separate motor. Note that this has to be ordered from the factory and cannot be added later, unlike most other optional configurations.
Know a useful link or video for the SCM Minimax SC 4 Elite? Send me a message, and I'll update the page with your info.
Ask questions or share your experiences with the SCM Minimax SC 4 Elite with others
All the specs and options for the SCM Minimax SC 4 Elite
|Working height||900 mm|
|Weight (standard configuration)||473 kg|
|Motor Voltage||3x 400V 1x 230V|
|Motor Frequency||50 or 60 Hz|
|Extra Features and Options|
|Short fence for angled cuts with flip-over stops||Option|
|Additional table on the sliding carriage||Option|
|Digital readout for setting the fence precisely to 1/10 mm||Option|
|Dado blade set||Option|
|Improved overhead blade guard||Option|
|Maximum Ripping Width||900 mm|
|Sliding Table Length||2660 mm|
|Maximum Width Crosscut Fence||3200 mm|
|Saw Blade Diameter||315 mm|
|Saw Blade RPM||4000|
|Maximum Cutting Height||100 mm|
|Scoring Blade Diameter||100 mm|
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2022