| Arbor size: 20 mm | Weight: 15 kg |
| Blade Tilt: -10 to 47° | Working height: 228 mm |
The Festool CSC SYS 50 is a cordless table saw that is small enough to fit in a Systainer-sized housing. You carry it to the job site like a case, fold out the side table and slide, and you have a saw that makes workshop-quality cuts. Depending on the market it is sold as the CSC SYS 50 EB or EBI, and it won an iF Gold Award in 2023.
It runs on two 18 V Festool battery packs that power a brushless EC-TEC motor. The speed is adjustable between 4500 and 6800 rpm, so you can match it to the material you are cutting. The blade has a 20 mm bore.
Tip: The saw needs two 18 V battery packs of at least 4.0 Ah, and they are not included with the basic version. If you don’t own Festool batteries yet, factor in the cost of an energy set. Larger packs, like the 8.0 Ah ones Festool recommends, give you noticeably more cutting time per charge.
What makes this saw really stand out is how you set it up. Instead of cranking handwheels, the blade height and tilt are set with electric stepper motors, controlled from a digital display with a precision of 0.1 mm. You can also save settings and recall them later, which is handy for repeat cuts.
The blade tilts from -2° to 47°. A -10° bevel is possible too, but only with a reduced cutting depth of 21 to 32 mm.
The maximum cutting height is 48 mm at 90° and 34 mm at 45°. Rip cuts up to 280 mm wide are made against a parallel fence that clamps at both ends with a single lever. For cross-cuts there is a ball bearing-mounted slide with an angle stop, which handles boards up to 450 mm wide and mitres from -70° to 70°. That is a lot of capacity for a saw of this size, but it is still a compact saw: don’t expect to rip full sheets or thick hardwood.
For dust there is a chip collection bag, so you can work without an extractor, and a 27 mm port that pairs with Festool’s cordless extractors over Bluetooth. The saw itself weighs 15 kg. The optional UG-CSC-SYS underframe works as both a wheeled trolley and a stand, which makes it a complete mobile workstation.
Know a useful link or video for the Festool CSC SYS 50 Table Saw? Send me a message, and I'll update the page with your info.
Reviews and Videos
Festool table saw review
youtube.com
In-depth review of the CSC SYS 50 by Bent's Woodworking, one of the best independent sources on Festool tools.
CSC SYS 50 accessories you'll actually use
youtube.com
Bent's Woodworking goes through the accessories for the CSC SYS 50 and which ones are worth buying.
12 month review
youtube.com
GT Woodshop shares his experiences after using the CSC SYS 50 for a full year.
Two months on
youtube.com
Furniture maker Peter Millard gives his opinion after two months of using the CSC SYS 50 in his workshop.
In-depth review of the CSC SYS 50 EBI
youtube.com
Long, detailed review by Tools & Stuff covering setup, the digital controls and cutting tests.
Inside Festool: the CSC SYS 50
youtube.com
Festool's own walkthrough of the saw, showing all its features and how they work.
General
Festool CSC SYS 50 product page
festool.co.uk
Official product page with full technical data
Manuals
Festool CSC SYS 50 operating instructions
festool.io
Featured Resource
Official operating manual (PDF) from Festool
Be the first to share your experiences with the Festool CSC SYS 50 Table Saw
All the specs and options for the Festool CSC SYS 50 Table Saw
| General | |
|---|---|
| Working height | 228 mm |
| Weight (standard configuration) | 15 kg |
| Total height | 296 mm |
| Total width | 396 mm |
| Extra Features and Options | |
|---|---|
| Rip fence, angle stop and chip collection bag | Included |
| Electric blade height and tilt adjustment with digital display | Included |
| 2 x 18 V battery packs and charger | Option |
| UG-CSC-SYS underframe | Option |
| Table Saw | |
|---|---|
| Maximum Cutting Height | 48 mm |
| Maximum Ripping Width | 280 mm |
| Saw blade | |
| Saw Blade Diameter | 168 mm |
| Tilt | -10 to 47° |
| Arbor diameter | 20 mm |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2026
There are no comments yet, be the first to leave one!
Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!