machine atlas logo

Type of machine

Table Saw

Manufacturer

Festool

Designed in

Germany

Production status

New

  • Festool CSC SYS 50 cordless table saw with the side table folded out
  • Festool CSC SYS 50 with Systainer, rip fence, angle stop, blade guard and chip bag
  • Front of the Festool CSC SYS 50 with its digital display and dual battery bays
  • Festool CSC SYS 50 table saw on the UG-CSC-SYS underframe
  • Setting the cutting height on the Festool CSC SYS 50 digital display
  • Ripping a board on the Festool CSC SYS 50 with dust extraction
Specifications
Blade Diameter: 168 mm
Max cutting height: 48 mm Max ripping width: 280 mm
Arbor size: 20 mm Weight: 15 kg
Blade Tilt: -10 to 47° Working height: 228 mm
See detailed specs

Machine overview

When you sign up, you can:

By

The Festool CSC SYS 50 is a cordless table saw that is small enough to fit in a Systainer-sized housing. You carry it to the job site like a case, fold out the side table and slide, and you have a saw that makes workshop-quality cuts. Depending on the market it is sold as the CSC SYS 50 EB or EBI, and it won an iF Gold Award in 2023.

Two batteries, brushless motor

It runs on two 18 V Festool battery packs that power a brushless EC-TEC motor. The speed is adjustable between 4500 and 6800 rpm, so you can match it to the material you are cutting. The blade has a 20 mm bore.

Tip: The saw needs two 18 V battery packs of at least 4.0 Ah, and they are not included with the basic version. If you don’t own Festool batteries yet, factor in the cost of an energy set. Larger packs, like the 8.0 Ah ones Festool recommends, give you noticeably more cutting time per charge.

Digital height and tilt adjustment

What makes this saw really stand out is how you set it up. Instead of cranking handwheels, the blade height and tilt are set with electric stepper motors, controlled from a digital display with a precision of 0.1 mm. You can also save settings and recall them later, which is handy for repeat cuts.

The blade tilts from -2° to 47°. A -10° bevel is possible too, but only with a reduced cutting depth of 21 to 32 mm.

Cutting capacity

The maximum cutting height is 48 mm at 90° and 34 mm at 45°. Rip cuts up to 280 mm wide are made against a parallel fence that clamps at both ends with a single lever. For cross-cuts there is a ball bearing-mounted slide with an angle stop, which handles boards up to 450 mm wide and mitres from -70° to 70°. That is a lot of capacity for a saw of this size, but it is still a compact saw: don’t expect to rip full sheets or thick hardwood.

Review of the CSC SYS 50 by Bent’s Woodworking

Dust collection and transport

For dust there is a chip collection bag, so you can work without an extractor, and a 27 mm port that pairs with Festool’s cordless extractors over Bluetooth. The saw itself weighs 15 kg. The optional UG-CSC-SYS underframe works as both a wheeled trolley and a stand, which makes it a complete mobile workstation.

Discussion

Be the first to share your experiences with the Festool CSC SYS 50 Table Saw

There are no comments yet, be the first to leave one!

Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!

Leave a comment

Your email address will not be published. Required fields are marked *

Detailed Specifications

All the specs and options for the Festool CSC SYS 50 Table Saw

General
Working height228 mm
Weight (standard configuration)15 kg
Total height296 mm
Total width396 mm
Extra Features and Options
Rip fence, angle stop and chip collection bagIncluded
Electric blade height and tilt adjustment with digital displayIncluded
2 x 18 V battery packs and chargerOption
UG-CSC-SYS underframeOption
Table Saw
Maximum Cutting Height48 mm
Maximum Ripping Width280 mm
Saw blade
Saw Blade Diameter168 mm
Tilt-10 to 47°
Arbor diameter20 mm

Did you find an error in our data? Send me a message, and I'll update the page with your info.