machine atlas logo

Type of machine

Jointer Planer Combo

Manufacturer

Kity

Designed in

France

Production status

Vintage

Specifications
Jointing width: 310 mm
Max jointing depth: 3 mm Tables length: 1400 mm
Type of Cutters: 3 knives Fence Tilt: 90-45 °
Working height: 850 mm
Planer width: 310 mm
Max depth of cut: 3 mm Table length: 530 mm
Max workpiece height: 200 mm Feed rate(s): 7.5m/min
See detailed specs

Machine overview

When you sign up, you can:

By

The Kity 1647 Jointer Planer is a relatively large machine for the hobbyist market.

One of the main positives about this machine is that it is one of the last to still be produced by Kity in France. Its successors (the 2636 and 2638) were produced in China by Scheppach and therefore are a bit hit and miss in terms of quality.

It has a dust hood attached, which swings upwards when converting to planing/thicknessing, and down again when jointing. This does mean the planing table has to be lowered every time you change back to jointing, which can be a minor annoyance.

In our experience, these larger machines tend to be more expensive on the second-hand market.

Quality

B

What we don't like

  • Need to lower the planer/thicknessing table to allow the fixed dust hood to sit when jointing
  • Relatively expensive on the second-hand market

What we like

  • The tables swing upwards and don’t lose their settings
  • Large capacity for a hobbyist machine
  • Sturdy and stable

Resources and Guides

Know a useful link or video for the Kity 1647 Jointer Planer? Send me a message, and I'll update the page with your info.

Discussion

Ask questions or share your experiences with the Kity 1647 Jointer Planer with others

  1. Does anyone know of a helical cutter head that suits this combo machine?

    K
    Kaleb
  2. Does anyone know where to get some parts for this Kity 1647 Jointer Planer?? The sprocket of 1 indeed roller has gone in parts! thanks

    m
    matteo
  3. How do I find a manual for the Kity 1637 series 6 machine

    G
    Gianni Cestari
  4. I have inherited a 1993 Kity 1647 Jointer Planer and am struggling to get the thicknesser feed to work. Any suggestions as to what might be the problem or how I might get it repaired if wear is the problem?
    Bryan

    • Hi Bryan, hard to say without a bit more information. Do the thickness rollers work at all? And are they slipping? Or are they not rotating at all? It could be that a cog wheel is broken (sometimes these are made of plastic), or that the belt that connects the rollers to the cutterhead is slipping. If you open up the machine you might be able to see if this is the case.

      R
      RobFounder
  5. What is the difference between the 1637 and 1647 Kity jointer/planers? Anybody know? They look pretty similar except for the color scheme.

    D
    Daniel Rosberg

Replying to Bryan Jarvis Cancel reply

Your email address will not be published. Required fields are marked *

Detailed Specifications

All the specs and options for the Kity 1647 Jointer Planer

General
Working height850 mm
Weight (standard configuration)125 kg
Motor
Motor Voltage3x 400V 1x 230V
Jointer
Jointing width310 mm
Max depth of cut3 mm
Tables length1400 mm
Type of cutters3 knives
Fence tilt90-45°
Planer
Planer Width310 mm
Max depth of cut3 mm
Table length530 mm
Max workpiece height200 mm
Feed rate(s)7.5m/min

Did you find an error in our data? Send me a message, and I'll update the page with your info.