machine atlas logo

Type of machine

Jointer Planer Combo



Designed in


Production status


User rating (1 vote)

  • Lurem Former RD30 Jointer Planer
  • Lurem Former RD30 Blue
Jointing width: 300 mm Power: 1850 W
Max jointing depth: 3 mm Tables length: 1200 mm
Type of Cutters: 2 Standard Blades Fence Tilt: 90-45 °
Fence length: 800 mm
Planer width: 300 mm Power: 1850 W
Max depth of cut: 3 mm Table length: 500 mm
Max workpiece height: 165 mm Feed rate(s): 5m/min
See detailed specs

Machine overview

When you sign up, you can:


The Lurem Former RD30 is a jointer planer which has 300mm jointing and planing width. It was one of the last machines made by Lurem in France, although the design comes from the Elektra Beckum and Metabo HC300. Those machines were also made by Lurem in France.

Detachable jointer table

Most machines of this size (300mm and wider) have tables that fold upwards. On the RD30 however, you have to remove the outfeed table to switch to planing mode. This is the same on the smaller version of this machine, the Lurem RD26.

The detachable table is secured with special locking mechanism that seems a bit more solid and secure than that found on the HC260 machines.

Power and Anti-kickback system

The machine runs on 1850 Watt (2850 in 3 phase) and has a patented anti-kickback system, which helps when you’re trying to take off too much material in one pass. It has a long fence (800 x 150mm) and the tables are quite long too (1200mm).

Replacement Blades: If you’re looking for replacement blades, you can find some that are advertised as being specifically for the Lurem RD30 on eBay, or some for the Metabo / EB HC300 on Amazon (that will also 99% likely fit the Lurem).

Machine Atlas Verdict

All-round solid machine. Can be a really good value if you're looking for a 300mm machine.

Value for money




What we don't like

  • Tables don’t fold up, but need to be removed to convert from jointing to planing

What we like

  • Large jointing and planing capacity
  • Solid, stationary machine
  • Good build quality
  • Long fence

Resources and Guides

Know a useful link or video for the Lurem Former RD30? Send me a message, and I'll update the page with your info.




Be the first to share your experiences with the Lurem Former RD30

There are no comments yet, be the first to leave one!

Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!

Leave a comment

Your email address will not be published. Required fields are marked *

Detailed Specifications

All the specs and options for the Lurem Former RD30

Motor Voltage3x 400V 1x 230V
Jointing width300 mm
Max depth of cut3 mm
Tables length1200 mm
Type of cutters2 Standard Blades
Fence length800 mm
Fence tilt90-45°
Planer Width300 mm
Max depth of cut3 mm
Table length500 mm
Max workpiece height165 mm
Feed rate(s)5m/min

Did you find an error in our data? Send me a message, and I'll update the page with your info.