Type of machine
Jointer Planer ComboManufacturer
MetaboDesigned in
Germany
Production status
Vintage
 Jointing width: 310 mm |
 Power: 2800 W |
 Max jointing depth: 3 mm |
Tables length: 1240 mm |
| Type of Cutters: Reversible self-adjusting blades | Fence Tilt: 90-45 ° |
| Planer width: 307 mm |
Power: 2800 W |
| Max depth of cut: 3 mm |
Table length: 550 mm |
| Max workpiece height: 180 mm | Feed rate(s): 5m/min |
The Metabo ADH 310 jointer planer is the largest out of the Magnum series jointer planer combination machines. It is similar to the ADH 260 and the ADH 1630, but has more capacity. It is also the only one to have a mortising table attachment and a table extension.
Another difference with its smaller versions is that not only the planing/thicknessing table is made from cast iron, but also the entire jointer table. This is also the reason why this machine is so much heavier (150kg).
The fence is secured both front and back, minimizing potential flex when pushing on the far ends.
It was also marketed as the Elektra Beckum HC 333 and later the Metabo HC 333, which despite their name also had a jointing width of 310mm.
Know a useful link or video for the Metabo ADH 310 Jointer Planer? Send me a message, and I'll update the page with your info.
Ask questions or share your experiences with the Metabo ADH 310 Jointer Planer with others
All the specs and options for the Metabo ADH 310 Jointer Planer
| General | |
|---|---|
| Weight (standard configuration) | 140 kg |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Extra Features and Options | |
|---|---|
| Table length extension | Option |
| Roller supports | Option |
| Mortising attachment | Option |
| Jointer | |
|---|---|
| Jointing width | 310 mm |
| Max depth of cut | 3 mm |
| Tables length | 1240 mm |
| Type of cutters | Reversible self-adjusting blades |
| Fence tilt | 90-45° |
| Planer | |
|---|---|
| Planer Width | 307 mm |
| Max depth of cut | 3 mm |
| Table length | 550 mm |
| Max workpiece height | 180 mm |
| Feed rate(s) | 5m/min |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
I work with this machine, but I cannot change the 2 knive-blades. As I see it now, I need to disamble the whole rotator with bearing blocks, because I cannot slide the knives out sideways after loosening the two lefthand threaded bolts.