 Jointing width: 250 mm |
 Power: 2000 W |
 Max jointing depth: 5 mm |
Tables length: 1080 mm |
| Type of Cutters: Spiral cutterhead | Fence Tilt: 90 / 45 ° |
| Fence length: 700 mm | Working height: 990 mm |
| Planer width: 250 mm |
Power: 2000 W |
| Max depth of cut: 1.8 mm |
Table length: 600 mm |
| Max workpiece height: 190 mm | Feed rate(s): 8m/min |
The Bernardo ADM 260 S is one of the most affordable jointer planers with a spiral cutterhead on the market right now. Its basic design is similar to many imported machines, like those made by Holzmann, HBM, and other brands, but with an upgraded cutterhead.
It is almost identical to the ‘regular’ Bernardo ADM 260, which has normal blades instead of the spiral cutterhead of the S version. It should also not be confused with the AD 260 S (without the M), which is a higher quality, slightly more substantial version. Bernardo rates the ADM series for hobbyists, while the AD series is for semi-professional use.
The spiral cutterhead is what makes the ADM 260 S such an interesting machine and sets it apart from its competitors. Spiral cutterheads are quieter, leave a better finish, and last much longer than regular blades. They are also easier to replace and cheaper in the long run. There are 24 individual carbide cutters laid out in a spiral shape on the cutterhead.
Its tables are made from cast iron, which is an upgrade compared to Bernardo’s cheaper PT 305 D and PT 260 series, which have a similar size, but have aluminium tables instead.
The machine also comes with a special lever to engage or disengage the infeed rollers. Additionally, it can also be fitted with an optional mortising table on the side of the machine, which costs about €400 when purchased separately.
Know a useful link or video for the Bernardo ADM 260 S Jointer Planer? Send me a message, and I'll update the page with your info.
General
Official page on Bernardo's website
bernardo.at
Official page on Bernardo's website
Ask questions or share your experiences with the Bernardo ADM 260 S Jointer Planer with others
Handpicked alternative machines for the Bernardo ADM 260 S Jointer Planer
A similar machine, sold by Holzmann but without a spiral cutterhead.
Another reasonably priced option with a spiral cutterhead. More expensive, and better build quality than the Bernardo.
All the specs and options for the Bernardo ADM 260 S Jointer Planer
| General | |
|---|---|
| Working height | 990 mm |
| Weight (standard configuration) | 160 kg |
| Motor | |
| Motor Voltage | 1x 230V |
| Extra Features and Options | |
|---|---|
| Mortising table | Option |
| Jointer | |
|---|---|
| Jointing width | 250 mm |
| Max depth of cut | 5 mm |
| Tables length | 1080 mm |
| Type of cutters | Spiral cutterhead |
| Fence length | 700 mm |
| Fence tilt | 90 / 45° |
| Planer | |
|---|---|
| Planer Width | 250 mm |
| Max depth of cut | 1.8 mm |
| Table length | 600 mm |
| Max workpiece height | 190 mm |
| Feed rate(s) | 8m/min |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
do you sell this planer in the US too ?
hi rob
I’m not very experienced woodworker and it’s difficult for me to decide which machine to buy.
After many hours spend searching, the only viable option for me came out to be bernardo line.
My question is: what does mean better build quality for axminster or minimax? I’d really like to buy minimax genius,but I am wondering is minimax or axminster really so much better then bernardo or the one is paying the brand?
Hi Aleksandar,
I would say the Minimax is a clear step above the other machines and basically you will have a guarantee that you will have a machine that you can use for many years without any problems. The difference between Bernardo and Axminster is a little less, and more in terms of quality control and support.
I think you can still get good results with the Bernardo, but you’ll need to finetune it yourself to get it accurate, and you might get unlucky with some quality issues (like tables not being flat). And the materials used will be less good and durable.
But it’s still not a bad machine, and if you are asking if you can get good planing results when you finetune it and set it up, then the answer is yes. The only question is if it will perform the same way in 5 years, and if you get unlucky and get some issues with it, if you get good support from the seller.
But you always read more bad stories online than good stories, so probably the chances of big problems are not that big in reality. So Bernardo can still be good value for the price.
Hope that helps!
Rob