machine atlas logo

Type of machine

Band Saw

Manufacturer

Hammer

Designed in

Austria

Production status

New

  • Hammer N4400 Band Saw

    Hammer N4400 Band Saw

  • Hammer N4400 Bandsaw Table
  • Hammer N4400 Bandsaw Guides
Specifications
Power: 2500 W Max cutting height: 310 mm
Table size: 420 x 575 mm Max cutting width: 420 mm
Wheel Diameter: 440 mm Blade length: 3976 mm
Blade width: 6–25 mm Working height: 886 mm
See detailed specs

Machine overview

When you sign up, you can:

By

The Hammer N4400 band saw has a great price/performance ratio, making it an attractive machine for hobbyists and semi-professionals to get professional quality for a price that is in range of enthusiasts as well.

This saw is the big brother of the Hammer N3800. The main difference between the two is the size.

It usually sells just above the 2000 USD or EUR mark, and can be upgraded with multiple features. The most popular feature is probably the X-LIFE Ceramic blade guides. You can also add a laser guide, table extensions to the back and front, and even convert the saw to a sanding station.

The N4400 is made in Austria and possibly parts in Italy as well, by band saw manufacturer ACM.

Value for money

A

Quality

A

What we don't like

  • There are cheaper alternatives that will perform almost as well for hobbyists
  • No quick release lever for blade tension

What we like

  • Excellent price/performance ratio
  • Professional-level quality at a reasonable price
  • Reliable manufacturer with high standards

Resources and Guides

Know a useful link or video for the Hammer N4400? Send me a message, and I'll update the page with your info.

General

Repairs

iconManuals

Discussion

Ask questions or share your experiences with the Hammer N4400 with others

  1. Where can I buy the hammer and 4400 for under $2000?

    P
    Paul Brieck
    • Hi Paul, you can find slightly used or demo models for just under €2000 on Felder’s special website called World 4 Machines. Prices may vary and to see the current price you need to make an account.

      Hope that helps!

      R
      RobFounder
  2. Hello,

    What is the part number for drive vbelt for Hammer 4400?

    I had odered what I was told by a former dealer it is a SPZ 1000.

    The new belt ( SPZ 1000) is belt is at least 40-60 mm too short even with motor tensioner screw loosened as far as it will go.

    Any help would be appreciated.

    Thank you.

    S
    Stan Otto
  3. Where should the blade sit on a N4400 bandsaw. the manual says in the middle of the wheel. But with the wheel flat compared other bandsaws does this damage the tips of the saw teeth and also the tips of the teeth damage the rubber on the wheel. I recall someone saying that the teeth should slightly overhang the rubber on this machine? Also I am having trouble getting the back of the saw exactly blade perpendicular to the table top ~89.5%

Replying to Paul Brieck Cancel reply

Your email address will not be published. Required fields are marked *

Detailed Specifications

All the specs and options for the Hammer N4400

General
Working height886 mm
Weight (standard configuration)170 kg
Total height1865 mm
Motor
Motor Voltage3x 400V 1x 230V
Motor Frequency50 or 60 Hz
Extra Features and Options
Circle cutting deviceOption
Sanding unitOption
Mitre fenceOption
Rolling carriage without lifting barOption
Lifting bar for rolling carriageOption
Band Saw
Maximum Cutting Height310 mm
Maximum Cutting Width420 mm
Table size420 x 575 mm
Band Saw blade
Blade length3976 mm
Blade width6–25 mm

Did you find an error in our data? Send me a message, and I'll update the page with your info.