 Power: 750 W |
 Max cutting height: 200 mm |
| Table size: 500 x 500 mm |
 Max cutting width: 305 mm |
| Wheel Diameter: 315 mm | Blade length: 2300 mm |
| Working height: 950 mm |
The Kity 613 Band Saw is a solid machine and the successor to the slightly smaller Kity 612. Its main advantage is its size, which is about 20 to 30% larger than most comparable machines.
After Scheppach took over Kity, they continued to make this bandsaw for some years, first as the Scheppach 613, and later as the Scheppach Basa 3.0. So if you’re looking for some replacement parts, you may find them under the Scheppach name as well.
Know a useful link or video for the Kity 613 Band Saw? Send me a message, and I'll update the page with your info.
Machine Atlas Guides
A Guide to Kity Woodworking Machines
machineatlas.com
How to identify from what period a Kity machine is, and what that tells you.
Reviews and Videos
Making a closed stand for the Kity 613
youtube.com
Bernhard Rindlisbacher shows how to make a nice closed stand for the Kity 613
Manuals
Official Manual
onedrive.com
The official manual for the Kity 613 in English, French, and German.
Ask questions or share your experiences with the Kity 613 Band Saw with others
All the specs and options for the Kity 613 Band Saw
| General | |
|---|---|
| Working height | 950 mm |
| Weight (standard configuration) | 65 kg |
| Total height | 1560 mm |
| Total width | 510 mm |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Band Saw | |
|---|---|
| Maximum Cutting Height | 200 mm |
| Maximum Cutting Width | 305 mm |
| Table size | 500 x 500 mm |
| Band Saw blade | |
| Blade length | 2300 mm |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2023
Hi
What width blades can it take
Thanks Rob
Hi Rob, the manual doesn’t actually say, but there are a few sellers offering band saw blades specifically for the Kity 613 and they suggest from 6 to about 16mm wide blades.
Hope that helps!
There’s a good range of 90 1/2″ blades (2300mm) here…
https://kendaltools.co.uk/product/901-22300mm-bandsaw-blade/?attribute_pa_width=4-7mm-3-16-inch&attribute_pa_teeth-per-inch=10tpi
Hi,I am trying to bye a wheel tire for my Kity 613 but can’t see anyone who I can purchase this from. I would appreciate it if someone could give me a company I can purchase one from. Thanks in advance. Martin.
Hi Martin, I found these in the UK: https://www.bedfordsaw.co.uk/tyretire-for-kity-613-bandsaws They’re affordable and local, but seem to be out of stock. There are a few other sellers of Kity 613 tires on eBay, like this one: https://www.ebay.co.uk/itm/KITY-613-BLUE-MAX-ULTRA-DUTY-URETHANE-BAND-SAW-TIRES-FOR-KITY-613-BAND-SAW-TYRES-/352316320903
But they are a bit more expensive. Hope that helps!
Hi, I have a Kity 613 and have always set it up with the teeth just over the edge of the top wheel as per the manual. But I notice that every youtube video on setting up bandsaw blades says they should be centred on the wheel. I do find that unless the blade is very new, I can’t use a fence but have to guide the piece through via a marked line. Any advice please? Thanks
Hi Steve, there doesn’t seem to be a definitive answer to where to position the blade on the wheel. Ultimately the best position is the one that gives you the best cuts. Have you tried positioning the blade in the center of the wheel? Manufacturers tend to advise otherwise so you aren’t able to damage the rubber tires, but it may not be the best cutting position.
Hope that helps!
Does anybody know where I can get a new power switch for my kity 613
Hi Mark, I wasn’t able to find any stores selling a new power switch. Your best bet would probably to get an electrician to replace it with a comparable switch. Maybe this thread on UKWorkshop could be helpful.
Hi I have a kitty 613 bandsaw which was my fathers . The blade keeps coming off all the time.
So i thought it was time to change the blade . Could I have some help on changing it please
I dont have a kity band saw but the reason the blade keeps coming off is that that it is not tracking well maybe the top wheel is tipping it too far forward . try adjusting this backwards a little.
HI , I RECENTLY BOUGHT A KITY MDL 613 IN WHAT APPEARS TO BE IN PERFECT – NEW COND. FIRST QUESTION IS CAN THE EXISTING MOTOR BE REWIRED FROM 220V TO110V ? AND QUESTION #2 WHAT THE APPROPRIATE VALUE MIGHT BE ?… THANKS FOR ALL YOUR INFO & SUPPORT ! I
Looking for a plug and lead (2pin) for a Kitty Band Saw. I don’t know the model or what voltage, of the one I have seen, is. Would the electrical connection vary between models.
The one I have just seen, the owner wants to keep, at the moment but if I can get a lead, I might get use of it.