Type of machine
Jointer Planer ComboManufacturer
ScheppachDesigned in
Germany
Production status
Vintage
 Jointing width: 260 mm |
 Power: 2700 W |
 Max jointing depth: 3 mm |
Tables length: 1040 mm |
| Type of Cutters: Two Standard Blades | Fence Tilt: 90-45 ° |
| Working height: 820 mm |
| Planer width: 250 mm |
Power: 2700 W |
| Max depth of cut: 5 mm |
Table length: 430 mm |
| Max workpiece height: 140 mm | Feed rate(s): 5m/min |
The Scheppach HMC 2600 ci jointer planer is the successor to the HMC 2600, with the main improvement being its cast iron tables, which are a major upgrade over the sheet metal tables of its predecessor. The HMC 3200 ci is its larger brother.
Two other new features are the ability to turn off the feed rollers when you are just jointing, and the addition of a micro switch for safety. This micro switch means you cannot turn on the machine if the dust hood is not in the right position.
It is also similar to the HMS 2600 ci, which lacks the extensions available to the HMC 2600 ci. However, the HMS 2600 ci has higher planing height.
There are two main extensions available for this machine: A mortising table and a spindle moulder. The spindle moulder attachment also sometimes comes with an additional sliding table, making it quite a capable combination machine.
One potential downside to this machine is that it was produced in the period (mid-2000s) Scheppach was moving (parts of) their production to China, so it is unclear to what extent this is a German or a Chinese machine.
It was succeeded by the Plana 3.0c, which has slightly longer planing and jointing tables.
Know a useful link or video for the Scheppach HMC 2600 ci Jointer Planer? Send me a message, and I'll update the page with your info.
General
Catalog of the HMC 2600 ci
hoechsmann.com
Catalog of the HMC 2600 ci showing specs, images, and detailed description of the machine.
Repairs
Detailed exploded drawing
scheppach.nl
Featured Resource
Detailed exploded drawing of all parts and part numbers of the Scheppach HMC 2600 ci.
Ask questions or share your experiences with the Scheppach HMC 2600 ci Jointer Planer with others
All the specs and options for the Scheppach HMC 2600 ci Jointer Planer
| General | |
|---|---|
| Working height | 820 mm |
| Weight (standard configuration) | 174 kg |
| Total height | 960 mm |
| Total width | 700 mm |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 Hz |
| Extra Features and Options | |
|---|---|
| Mortising Table | Option |
| Spindle moulder attachment | Option |
| Sliding table for spindle moulder | Option |
| Jointer | |
|---|---|
| Jointing width | 260 mm |
| Max depth of cut | 3 mm |
| Tables length | 1040 mm |
| Type of cutters | Two Standard Blades |
| Fence tilt | 90-45° |
| Planer | |
|---|---|
| Planer Width | 250 mm |
| Max depth of cut | 5 mm |
| Table length | 430 mm |
| Max workpiece height | 140 mm |
| Feed rate(s) | 5m/min |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
Hi
My multi-grooved drive belt from motor pulley to cutter block keeps jumping off… any ideas? I have replaced the belt and tried adjusting the tension up & down but no effect…