Type of machine
Jointer Planer ComboManufacturer
ScheppachDesigned in
Germany
Production status
Vintage
 Jointing width: 310 mm |
 Power: 2200 W |
 Max jointing depth: 5 mm |
Tables length: 1520 mm |
| Type of Cutters: 4 standard or reversible blades | Fence Tilt: 90-45 ° |
| Working height: 850 mm |
| Planer width: 310 mm |
Power: 2200 W |
| Max depth of cut: 5 mm |
Table length: 750 mm |
| Max workpiece height: 220 mm | Feed rate(s): 8m/min |
The Scheppach Plana 4.0c jointer planer is a combination machine with an optional mortising table extension. It is the successor to the older HMC 3200 ci. It is essentially the same machine as the Kity 2638, which was also produced by Scheppach after they took over Kity.
The Plana 4.0 is a very similar machine, but lacks the mortising table of the 4.0c. There are a few other differences, namely that the combination version has 10 mm less jointing width, but 30 mm more planing height capacity. Both machines have cast iron tables.
It also lacks the ability to turn off the feed rollers, but the feed rate is a little higher (8m/min) than most other Plana machines (5m/min). This means you can work faster, but can get slightly worse planing results.
Nowadays much of Scheppach’s production takes place in China, so it is likely most parts of this machine were produced there as well. The Plana series are more advanced than previous machines, but generally considered somewhat less reliable due to the production abroad instead of Germany.
It was succeeded by the Plana 4.1c, which can still be bought new today.
Know a useful link or video for the Scheppach Plana 4.0c Jointer Planer? Send me a message, and I'll update the page with your info.
Ask questions or share your experiences with the Scheppach Plana 4.0c Jointer Planer with others
All the specs and options for the Scheppach Plana 4.0c Jointer Planer
| General | |
|---|---|
| Working height | 850 mm |
| Weight (standard configuration) | 345 kg |
| Total height | 950 mm |
| Total width | 700 mm |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 Hz |
| Extra Features and Options | |
|---|---|
| Mortising table | Option |
| Jointer | |
|---|---|
| Jointing width | 310 mm |
| Max depth of cut | 5 mm |
| Tables length | 1520 mm |
| Type of cutters | 4 standard or reversible blades |
| Fence tilt | 90-45° |
| Planer | |
|---|---|
| Planer Width | 310 mm |
| Max depth of cut | 5 mm |
| Table length | 750 mm |
| Max workpiece height | 220 mm |
| Feed rate(s) | 8m/min |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
Do you ship any of your machines to USA