Machine Atlas

Type of machine

Combination Machine

Manufacturer

SCM

Designed in

Italy

Production status

New

Specifications
Blade Diameter: 315 mm Power: 5000 W
Max cutting height: 100 mm
Sliding Table Length: 1660 mm Max crosscut width: 900 mm
Blade Tilt: 90-45 °
Power: 5000 W
Max spindle height: 100 mm Max bit width: 210 mm
Table dimensions: 1115 x 430 mm Spindle speeds: 3500 / 7000 / 10000 RPM
See detailed specs

Machine overview

When you sign up, you can:

By

The SCM Minimax ST 3c (classic) is the second model in SCM’s Minimax saw & spindle moulder (shaper) combination series. It is very similar to the Minimax SC 3 Classic, but with the shaper added.

It is a clear step up from the Minimax ST 1 Genius, which is mainly for hobbyists, while the ST 3 Classic is also suitable for small professional workshops. The ST 3 Classic is larger, more powerful, and has many more upgrade options.

The sliding table is 1660 mm long, but can be upgraded to 2660 mm. The parallel (rip) cutting width is 900mm, but can be extended as far as 1270 mm. It comes standard with an outrigger table and eccentric clamp.

There are quite a few upgrade options available. These include a tenoning table and hood for the spindle moulder, digital readout for the fence position, a wheel set, and a shorter fence for quick angled crosscuts.

Quality

AA

What we like

  • Features like outrigger table and eccentric clamp are standard
  • High quality fence
  • Useful upgrades available

Resources and Guides

Know a useful link or video for the SCM Minimax ST 3 Classic and want to share it with others? Add it here

General

Discussion

Be the first to share your experiences with the SCM Minimax ST 3 Classic

There are no comments yet, be the first to leave one!

Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!

Leave a comment

Your email address will not be published. Required fields are marked *

Detailed Specifications

All the specs and options for the SCM Minimax ST 3 Classic

General
Motor
Motor Voltage3x 400V 1x 230V
Motor Frequency50 or 60 Hz
Extra Features and Options
Angular cutting device with flip-over stopsOption
Digital readout for the fence position on the parallel fenceOption
Additional table on the sliding carriageOption
Overhead blade protectionOption
Tenoning table and protection hoodOption
Electric pre-setting and flip over support for feederOption
Interchangeable spindleOption
Wheels for machine movementOption
Panel Saw
Sliding Table Length1660 mm
Maximum Width Crosscut Fence900 mm
Saw blade
Saw Blade Diameter315 mm
Maximum Cutting Height100 mm
Tilt90-45°
Spindle Moulder
Max spindle height100 mm
Max bit width210 mm
Table dimensions1115 x 430 mm
Spindle speeds3500 / 7000 / 10000

Did you find an error in our data? Let us know through this form.