 Blade Diameter: 315 mm |
 Power: 4000 W |
 Max cutting height: 103 mm |
 Max ripping width: 800 mm |
| Sliding Table Length: 2500 mm | Max crosscut width: 2600 mm |
| Blade Tilt: 90-45 ° |
| Spindle Diameter: 30 mm | Power: 4000 W |
| Max spindle height: 100 mm |
Max bit width: 220 mm |
| Spindle speeds: 3000 / 6000 / 8000 / 10000 RPM | |
The Hammer B3 Perform is the largest of the Hammer B3 saw and spindle-moulder combination series. The main difference with the B3 Winner Comfort and its smaller brothers is the larger body and longer sliding table.
Besides the added spindle moulder, it is essentially the same machine as the Hammer K4 Perform. Both machines are based on a longer panel-saw body, inspired by (or perhaps identical to) the Felder K500. The K4 Perform does have a longer (3200 vs 2500mm) sliding table.
There are several more differences between the B3 Perform and the smaller B3 Winner Comfort. It has a longer sliding table, a bigger outrigger table, bigger crosscut fence, a more powerful standard motor, and a separate motor for the scoring unit. Besides the more powerful motor, these are all features that are not available on the Winner Comfort.
This makes the B3 Perform the preferred machine for cutting large sheet goods, although the Winner Comfort is capable of the job as well.
Know a useful link or video for the Hammer B3 Perform? Send me a message, and I'll update the page with your info.
General
Official Page on the Felder-Group Website
felder-group.com
Official Page of the Hammer B3 Perform on the Felder-Group Website, showing specs and images.
Ask questions or share your experiences with the Hammer B3 Perform with others
All the specs and options for the Hammer B3 Perform
| General | |
|---|---|
| Weight (standard configuration) | 570 kg |
| Motor | |
| Motor Voltage | 3x 400V 3x 230V 1x 230V |
| Motor Frequency | 50 or 60 Hz |
| Extra Features and Options | |
|---|---|
| Rolling carriage with lifting bar | Option |
| Smaller crosscut fence (900 mm) | Option |
| Extension for smaller crosscut fence (750 mm) | Option |
| Precision mitre guide index system | Option |
| Different spindle diameter systems | Option |
| Cast iron rip fence (800 or 1250 mm) | Option |
| Fine adjustment for professional rip fence | Option |
| Preparation for Dado tooling up to ¾” (19.5 mm) width | Option |
| Panel Saw | |
|---|---|
| Maximum Ripping Width | 800 mm |
| Sliding Table Length | 2500 mm |
| Maximum Width Crosscut Fence | 2600 mm |
| Saw blade | |
| Saw Blade Diameter | 315 mm |
| Saw Blade RPM | 4800 |
| Maximum Cutting Height | 103 mm |
| Tilt | 90-45° |
| Scoring Blade | |
| Scoring Blade Diameter | 80 mm |
| Spindle Moulder | |
|---|---|
| Spindle Diameter | 30 mm |
| Max spindle height | 100 mm |
| Max bit width | 220 mm |
| Spindle speeds | 3000 / 6000 / 8000 / 10000 |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
I like more info about these saw and need info about pricing for new and used saw as well thank you
Craig Peters
CPC Carpenter
cpccarpentry @gmail.com
Hi Craig, to get more information about these Hammer machines you should contact Felder themselves: https://www.felder-group.com/ They have distributors / contacts in almost every country.
Hope that helps.