 Blade Diameter: 315 mm |
 Power: 3000 W |
 Max cutting height: 103 mm |
 Max ripping width: 800 mm |
| Sliding Table Length: 2050 mm | Max crosscut width: 900 mm |
| Blade Tilt: 90-45 ° | Working height: 880 mm |
| Spindle Diameter: 30 mm | Power: 3000 W |
| Max spindle height: 100 mm |
Max bit width: 220 mm |
| Spindle speeds: 3000 / 6000 / 8000 / 10000 RPM | |
| Working height: 880 mm |
The Hammer B3 Winner Comfort is a panel saw and spindle moulder combination machine. It is very similar to the Hammer K3 panel saw, but with the added functionality of the spindle moulder. It is the fully-featured version of the Hammer B3 Winner.
It is essentially the same machine as the B3 Winner, but with most optional upgrades in its standard configuration. Compared to the Winner, it has a longer sliding table (2050mm) and an outrigger table. This means you can use it as a proper panel saw and not just a sliding table saw.
The spindle moulder is positioned to the right of the saw. The spindle moulder cover needs to be removed in order to use the full table capacity when using the saw.
The Hammer B3 Perform is its larger brother, and has an even longer sliding table and a much larger body to support the sliding table.
Know a useful link or video for the Hammer B3 Winner Comfort? Send me a message, and I'll update the page with your info.
Reviews and Videos
Promotional video showing features
youtube.com
Promotional video showing many of the features and options of the B3 Winner comfort.
General
Official product page
felder-group.com
The official product page of the Hammer B3 Winner Comfort, with specs and catalogs.
Be the first to share your experiences with the Hammer B3 Winner Comfort
All the specs and options for the Hammer B3 Winner Comfort
| General | |
|---|---|
| Working height | 880 mm |
| Weight (standard configuration) | 400 kg |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 or 60 Hz |
| Extra Features and Options | |
|---|---|
| Rolling carriage without lifting bar | Option |
| Lifting bar | Option |
| Tilt-away mount for power feeders | Option |
| Crosscut fence 900 mm for all sliding table | Option |
| Crosscut fence extension 29 ½” (750 mm) for crosscut fence | Option |
| Several Spindle Moulder Sizes | Option |
| Rip capacity continuously adjustable 49” (1250 mm) | Option |
| Preparation for Dado tooling up to ¾” (19.5 mm) width | Option |
| Scoring unit | Option |
| Motor 4000W | Option |
| Panel Saw | |
|---|---|
| Maximum Ripping Width | 800 mm |
| Sliding Table Length | 2050 mm |
| Maximum Width Crosscut Fence | 900 mm |
| Saw blade | |
| Saw Blade Diameter | 315 mm |
| Saw Blade RPM | 4800 |
| Maximum Cutting Height | 103 mm |
| Tilt | 90-45° |
| Scoring Blade | |
| Scoring Blade Diameter | 80 mm |
| Spindle Moulder | |
|---|---|
| Spindle Diameter | 30 mm |
| Max spindle height | 100 mm |
| Max bit width | 220 mm |
| Spindle speeds | 3000 / 6000 / 8000 / 10000 |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
There are no comments yet, be the first to leave one!
Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!