|Blade Diameter: 315 mm||Power: 3000 W|
|Max cutting height: 103 mm||Max ripping width: 800 mm|
|Sliding Table Length: 1250 mm||Max crosscut width: 900 mm|
|Blade Tilt: 90-45 °|
|Spindle Diameter: 30 mm||Power: 3000 W|
|Max spindle height: 100 mm||Max bit width: 220 mm|
|Spindle speeds: 3000 / 6000 / 8000 / 10000 RPM|
The Hammer B3 Winner is the second machine in the B3 spindle moulder and saw combination series. It is slightly larger than the B3 Basic, and has more upgrade options, but it has less features than the B3 Winner Comfort.
It is very similar to the Hammer K3 Winner table / panel saw, but with a
spindle moulder added, which is positioned to the right of the saw. The spindle moulder cover needs to be removed in order to use the full table capacity when using the saw.
Buying a spindle moulder-saw combination can be worthwhile if you need both machines anyway. The B3 Winner is about 40-50% more expensive than the K3 Winner, but purchasing a separate machine like the Hammer F3 Spindle Moulder would be double that.
There are several advantages of the Winner compared to the Basic. In its standard configuration it is slightly wider, resulting in 100mm more ripping capacity, and has a longer sliding table. The main difference however, is that the Winner can be upgraded significantly.
The standard motor can be upgraded to a 4000W version, and the sliding table can be almost doubled in length to 2050mm. Additionally, an outrigger table may be added, allowing you to use it like a true panel saw.
Know a useful link or video for the Hammer B3 Winner? Send me a message, and I'll update the page with your info.
Be the first to share your experiences with the Hammer B3 Winner
All the specs and options for the Hammer B3 Winner
|Weight (standard configuration)||400 kg|
|Motor Voltage||3x 400V 1x 230V|
|Motor Frequency||50 or 60 Hz|
|Extra Features and Options|
|Rolling carriage with lifting bar||Option|
|Crosscut fence (1300 mm) for outrigger table||Option|
|Crosscut fence extension (750 mm)||Option|
|Longer sliding table (2050 mm)||Option|
|Multiple spindle diameter systems||Option|
|Cast iron rip fence (800 or 1250 mm)||Option|
|Fine adjustment for rip fence||Option|
|Preparation for Dado tooling up to ¾” (19.5 mm) width||Option|
|Rip capacity continuously adjustable 49” (1250 mm)||Option|
|Maximum Ripping Width||800 mm|
|Sliding Table Length||1250 mm|
|Maximum Width Crosscut Fence||900 mm|
|Saw Blade Diameter||315 mm|
|Saw Blade RPM||4800|
|Maximum Cutting Height||103 mm|
|Scoring Blade Diameter||80 mm|
|Spindle Diameter||30 mm|
|Max spindle height||100 mm|
|Max bit width||220 mm|
|Spindle speeds||3000 / 6000 / 8000 / 10000|
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2022