The Hammer K3 Winner is the middle version of the Hammer K3 table and panel saw series. The main difference with the smaller K3 Basic is the longer sliding table, which can even be upgraded to 2050mm.
It can also be upgraded in more ways than the K3 Basic. You can add an outrigger table, making it function more like a panel saw, like the K3 Winner Comfort, which has an outrigger table in its standard form.
Every K3 saw comes with a miter gauge with a 900mm extrusion. The saw has a precision system which allows you to easily reset the miter gauge to its 90 degrees position, as can be seen here.
The Hammer B3 Winner is largely the same machine, but with a spindle moulder installed besides the circular saw.
Know a useful link or video for the Hammer K3 Winner? Send me a message, and I'll update the page with your info.
Be the first to share your experiences with the Hammer K3 Winner
All the specs and options for the Hammer K3 Winner
|Weight (standard configuration)||350 kg|
|Motor Voltage||3x 400V 3x 230V 1x 230V|
|Motor Frequency||50 or 60 Hz|
|Extra Features and Options|
|Rip capacity continuously adjustable 49” (1250 mm)||Option|
|Scoring blade system||Option|
|Capacity to use Dado blades (up to 19.5 mm)||Option|
|Fine adjustment for rip fence||Option|
|Cast iron professional rip fence, rip capacity 800 mm or 1250 mm||Option|
|Longer sliding table (2050 mm)||Option|
|Crosscut fence for outrigger table (1300 mm)||Option|
|Extension for crosscut fence (750 mm)||Option|
|Rolling carriage and lifting bar||Option|
|Maximum Cutting Height||103 mm|
|Maximum Ripping Width||800 mm|
|Table Dimensions||1250 x mm|
|Saw Blade Diameter||315 mm|
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2023