 Blade Diameter: 315 mm |
 Power: 3000 W |
 Max cutting height: 103 mm |
 Max ripping width: 800 mm |
| Sliding Table Length: 2000 mm | Max crosscut width: 1300 mm |
| Blade Tilt: 90-45 ° |
The Hammer K3 Winner Comfort is a sliding table panel saw aimed at serious enthusiasts and (semi-)professionals with smaller workshops.
The Winner Comfort is the largest version of the K3 series of panel saws. In comparison to the K3 Winner it has an outrigger table and longer sliding table. The K3 Basic has an even shorter sliding table and less rip capacity.
The Hammer B3 Winner Comfort is mostly the same machine, but with an added spindle moulder installed. The C3 31 Comfort even adds a jointer planer, and optional mortising attachment to the mix.
Hammer also offers the K4 Perform, which is actually based on a Felder panel saw body, and not the compact K3 series frame.
Know a useful link or video for the Hammer K3 Winner Comfort? Send me a message, and I'll update the page with your info.
Machine Atlas Guides
Guide to the Hammer K3 and K4 Table and Panel Saws
machineatlas.com
An overview of all the Hammer table and panel saws and a look at their differences.
Reviews and Videos
Marius Hornberger Review
youtube.com
Review of the K3 Basic, the smaller version of this saw. Most of his review will also apply to the K3 Winner Comfort
General
Official Information
felder-group.com
Official info about the K3 Winner Comfort on the website of the Felder group.
Be the first to share your experiences with the Hammer K3 Winner Comfort
All the specs and options for the Hammer K3 Winner Comfort
| General | |
|---|---|
| Weight (standard configuration) | 350 kg |
| Motor | |
| Motor Voltage | 3x 400V 3x 230V 1x 230V |
| Motor Frequency | 50 or 60 Hz |
| Extra Features and Options | |
|---|---|
| Rolling carriage without lifting bar | Option |
| Lifting bar | Option |
| Tilt-away mount for power feeders | Option |
| Cast iron professional rip fence, rip capacity 800 mm | Option |
| Fine adjustment for professional rip fence | Option |
| Mechanical scoring unit, scoring blade dia. 3 ⅛” (80 mm) | Option |
| Extended Rip capacity 49” (1250 mm) | Option |
| Panel Saw | |
|---|---|
| Maximum Ripping Width | 800 mm |
| Sliding Table Length | 2000 mm |
| Maximum Width Crosscut Fence | 1300 mm |
| Saw blade | |
| Saw Blade Diameter | 315 mm |
| Saw Blade RPM | 4800 |
| Maximum Cutting Height | 103 mm |
| Tilt | 90-45° |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
There are no comments yet, be the first to leave one!
Every comment on MachineAtlas is read and answered. And if you know some useful info or tips, please share them. You could really help out some fellow woodworkers!