 Blade Diameter: 315 mm |
 Power: 3000 W |
 Max cutting height: 103 mm |
 Max ripping width: 600 mm |
| Sliding Table Length: 2000 mm | Max crosscut width: 1300 mm |
| Blade Tilt: 90-45 ° |
| Spindle Diameter: 220 mm | Power: 3000 W |
| Max spindle height: 100 mm |
Max bit width: 220 mm |
| Spindle speeds: 3000 / 6000 / 8000 / 10000 RPM | |
| Jointing width: 310 mm |
Power: 3000 W |
| Max jointing depth: 4 mm |
Tables length: 1400 mm |
| Type of Cutters: 3 self-adjusting blades or Silent Power | Fence Tilt: 90-45 ° |
| Fence length: 1150 mm |
| Planer width: 306 mm |
Power: 3000 W |
| Max depth of cut: 4 mm |
Table length: 540 mm |
| Max workpiece height: 225 mm | Feed rate(s): 6m/min |
The Hammer C3 31 Comfort is the middle version of the C3 31 combination machine series. It is the larger version of the standard C3 31. Its larger brother is the C3 31 Perform.
The differences with the standard C3 31 are that the Comfort version has a longer sliding table (2050mm) and outrigger in its standard configuration. This basically upgrades it from a sliding table saw to full-fledged panel saw. The changes between the versions mainly affect the saw, not the other four functions. The Comfort is about 30% more expensive than the basic C3 31.
In contrast to the B3 and K3 series, there is no ‘Winner’ version, so the C3 31 Comfort is the equivalent of the B3 and K3 Winner Comfort. There are several options available, however, that would allow you to build a machine similar to the B3 and K3 Winner. Since all Hammer machines are made specifically for each customer, you can negotiate this with the company.
The addition of the jointer planer does take up extra space compared to the B3 and K3 series, which shows in the limited rip capacity of the saw compared to the saw-only version. Another downside is that the C3 uses the jointer fence for both jointing and sawing/moulding. This fence is inferior to the standard saw fence, as it has more flex and is shorter.
Know a useful link or video for the Hammer C3 31 Comfort? Send me a message, and I'll update the page with your info.
General
Official page on the Felder website
felder-group.com
Official page of the C3 31 Comfort on the Felder website showing images, specs, and options.
Ask questions or share your experiences with the Hammer C3 31 Comfort with others
All the specs and options for the Hammer C3 31 Comfort
| General | |
|---|---|
| Weight (standard configuration) | 610 kg |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 or 60 Hz |
| Extra Features and Options | |
|---|---|
| Rolling carriage and lifting bar | Option |
| Mortising table and chuck | Option |
| Smaller crosscut fence (900 mm) | Option |
| Extension for Smaller crosscut fence (750 mm) | Option |
| Multiple spindle diameter systems | Option |
| Scoring unit | Option |
| Fine adjustment for rip fence | Option |
| Preparation for Dado tooling up to ¾” (19.5 mm) width | Option |
| Silent Power spiral cutterblock | Option |
| Panel Saw | |
|---|---|
| Maximum Ripping Width | 600 mm |
| Sliding Table Length | 2000 mm |
| Maximum Width Crosscut Fence | 1300 mm |
| Saw blade | |
| Saw Blade Diameter | 315 mm |
| Saw Blade RPM | 4800 |
| Maximum Cutting Height | 103 mm |
| Tilt | 90-45° |
| Scoring Blade | |
| Scoring Blade Diameter | 80 mm |
| Spindle Moulder | |
|---|---|
| Spindle Diameter | 220 mm |
| Max spindle height | 100 mm |
| Max bit width | 220 mm |
| Spindle speeds | 3000 / 6000 / 8000 / 10000 |
| Planer | |
|---|---|
| Planer Width | 306 mm |
| Max depth of cut | 4 mm |
| Table length | 540 mm |
| Max workpiece height | 225 mm |
| Feed rate(s) | 6m/min |
| Jointer | |
|---|---|
| Jointing width | 310 mm |
| Max depth of cut | 4 mm |
| Tables length | 1400 mm |
| Type of cutters | 3 self-adjusting blades or Silent Power |
| Fence length | 1150 mm |
| Fence tilt | 90-45° |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
could you give me prices of all combination machines
Thank you
Paul Johnson