|Blade Diameter: 250 mm||Power: 1800 W|
|Max cutting height: 80 mm||Max ripping width: 500 mm|
|Sliding Table Length: 1200 mm|
|Blade Tilt: 90-45 °|
|Power: 1800 W|
|Max spindle height: 75 mm||Max bit width: 200 mm|
|Table dimensions: 1024 x 224 mm||Spindle speeds: 5000 / 7500 RPM|
|Jointing width: 260 mm||Power: 1800 W|
|Max jointing depth: 3 mm||Tables length: 1040 mm|
|Type of Cutters: 2 standard blades / Tersa / Spiral||Fence Tilt: 90-45 °|
|Planer width: 260 mm||Power: 1800 W|
|Max depth of cut: 3 mm||Table length: 450 mm|
|Max workpiece height: 200 mm||Feed rate(s): 6m/min|
The SCM Minimax C 26g (genius) is the entry-level machine from SCM’s combo machine series. It is a highly compact machine aimed at hobbyists. It is the smaller brother of the C 30 Genius, which is mostly the same machine, except for a larger jointer planer element. Sold in Germany under the Holzkraft brand.
The standard version of this machine misses the outrigger table, but it can be added if needed. Its motor can be upgraded slightly, but remains somewhat limited in terms of power.
One downside is that there is only one fence for both the jointer and saw. It is more similar to the fence found on Minimax planers than on their table saws. This is less than ideal, because the Minimax table saw fence is excellent, and because you will have to check that the fence is square quite every time you switch operations.
The cutterhead of the jointer and planer can be upgraded to a Tersa-version, as well as a spiral cutter version. Tersa blades are straight blades, but once set up they can be changed very quickly. Spiral cutters last much longer, because they can be used on four sides, and tend to be quieter.
Know a useful link or video for the SCM Minimax C 26 Genius? Send me a message, and I'll update the page with your info.
Be the first to share your experiences with the SCM Minimax C 26 Genius
All the specs and options for the SCM Minimax C 26 Genius
|Weight (standard configuration)||245 kg|
|Total width||1570 mm|
|Motor Voltage||3x 400V 1x 230V|
|Motor Frequency||50 or 60 Hz|
|Extra Features and Options|
|Xylent spiral cutterhead||Option|
|Tenoning table and protection hood||Option|
|Self-centering chuck 0-16 mm “Wescott” type||Option|
|Maximum Ripping Width||500 mm|
|Sliding Table Length||1200 mm|
|Saw Blade Diameter||250 mm|
|Maximum Cutting Height||80 mm|
|Max spindle height||75 mm|
|Max bit width||200 mm|
|Table dimensions||1024 x 224 mm|
|Spindle speeds||5000 / 7500|
|Planer Width||260 mm|
|Max depth of cut||3 mm|
|Table length||450 mm|
|Max workpiece height||200 mm|
|Jointing width||260 mm|
|Max depth of cut||3 mm|
|Tables length||1040 mm|
|Type of cutters||2 standard blades / Tersa / Spiral|
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2023