Type of machine
Combination MachineManufacturer
HammerDesigned in
Austria
Production status
New
User rating (1 vote)
 Blade Diameter: 315 mm |
 Power: 3000 W |
 Max cutting height: 103 mm |
 Max ripping width: 600 mm |
| Sliding Table Length: 800 mm | Max crosscut width: 900 mm |
| Blade Tilt: 90-45 ° |
| Spindle Diameter: 30 mm | Power: 3000 W |
| Max spindle height: 100 mm |
Max bit width: 220 mm |
| Spindle speeds: 3000 / 6000 / 8000 / 10000 RPM | |
| Jointing width: 310 mm |
Power: 3000 W |
| Max jointing depth: 4 mm |
Tables length: 1400 mm |
| Type of Cutters: 3 self-adjusting blades or Silent Power | Fence Tilt: 90-45 ° |
| Fence length: 1150 mm |
| Planer width: 306 mm |
Power: 3000 W |
| Max depth of cut: 4 mm |
Table length: 540 mm |
| Max workpiece height: 225 mm | Feed rate(s): 6m/min |
The Hammer C3 31 combination machine is the smallest and most affordable version of the Hammer C3 combination machine series. It combines a table saw, spindle moulder with jointer and planer functions, with the possibility of adding a mortising table. The C3 31 Comfort is the upgraded version of this machine.
The C3 31 is very similar to to the B3 Basic and the K3 Basic, but then with the A3 31 jointer planer tacked on the side. This addition does take extra space, which shows in the limited rip capacity of the saw compared to the saw-only version (K3 Basic).
Another downside compared to the B3 and K3 series is that the C3 uses the jointer fence for both jointing and sawing/moulding. This fence is inferior to the standard saw fence, as it has more flex and is shorter.
Compared to buying a B3 Basic saw/spindle-moulder and A3 31 Jointer Planer separately, the C3 31 is less than 10% cheaper. That means the decision between a single combination machine or multiple individual machines is less one of cost and more one of space.
Know a useful link or video for the Hammer C3 31? Send me a message, and I'll update the page with your info.
Reviews and Videos
Promo Video
youtube.com
Promo Video by Hammer showing all the different functionalities of the C3 31.
General
Official page on the Felder website
felder-group.com
Official page of the Hammer C3 31 on the Felder website, showing specs, options, and images.
Ask questions or share your experiences with the Hammer C3 31 with others
All the specs and options for the Hammer C3 31
| General | |
|---|---|
| Weight (standard configuration) | 610 kg |
| Motor | |
| Motor Voltage | 3x 400V 1x 230V |
| Motor Frequency | 50 or 60 Hz |
| Extra Features and Options | |
|---|---|
| Rolling carriage with lifting bar | Option |
| Outrigger table | Option |
| Crosscut fence for outrigger table | Option |
| Standard crosscut fence extension (750 mm) | Option |
| Longer sliding table (1250 or 2000 mm) | Option |
| Multiple spindle diameter systems | Option |
| Scoring unit | Option |
| Fine adjustment for rip fence | Option |
| Preparation for Dado tooling up to ¾” (19.5 mm) width | Option |
| Silent Power Spiral Cutterblock | Option |
| Panel Saw | |
|---|---|
| Maximum Ripping Width | 600 mm |
| Sliding Table Length | 800 mm |
| Maximum Width Crosscut Fence | 900 mm |
| Saw blade | |
| Saw Blade Diameter | 315 mm |
| Saw Blade RPM | 4800 |
| Maximum Cutting Height | 103 mm |
| Tilt | 90-45° |
| Scoring Blade | |
| Scoring Blade Diameter | 80 mm |
| Spindle Moulder | |
|---|---|
| Spindle Diameter | 30 mm |
| Max spindle height | 100 mm |
| Max bit width | 220 mm |
| Spindle speeds | 3000 / 6000 / 8000 / 10000 |
| Planer | |
|---|---|
| Planer Width | 306 mm |
| Max depth of cut | 4 mm |
| Table length | 540 mm |
| Max workpiece height | 225 mm |
| Feed rate(s) | 6m/min |
| Jointer | |
|---|---|
| Jointing width | 310 mm |
| Max depth of cut | 4 mm |
| Tables length | 1400 mm |
| Type of cutters | 3 self-adjusting blades or Silent Power |
| Fence length | 1150 mm |
| Fence tilt | 90-45° |
Did you find an error in our data? Send me a message, and I'll update the page with your info.
© Machine Atlas 2024
Do yu have any recommended brand of saw blade that will fit on these product for cutting wood, plywood , acrylic glass and aluminum plate..how many tooth as well, can i use thi kerf or thick kerf? As it has 2 small leg on the spindle that need to go through the blade.
Hello, I am interested in this machine, could you please send us price?