machine atlas logo

Type of machine

Combination Machine



Designed in


Production status


Prices from

9318.79 €

Blade Diameter: 315 mm Power: 4000 W
Max cutting height: 100 mm Max ripping width: 800 mm
Sliding Table Length: 1660 mm
Blade Tilt: 90-45 °
Power: 4000 W
Max spindle height: 100 mm Max bit width: 275 mm
Table dimensions: 1020 x 325 mm Spindle speeds: 3500 / 7000 / 10.000 RPM
Jointing width: 300 mm Power: 4000 W
Max jointing depth: 3 mm Tables length: 1300 mm
Type of Cutters: 3 Standard Blades / Tersa / Spiral Fence Tilt: 90-45 °
Planer width: 300 mm Power: 4000 W
Max depth of cut: 3 mm Table length: 450 mm
Max workpiece height: 220 mm Feed rate(s): 7m/min
See detailed specs

Machine overview

When you sign up, you can:


The SCM Minimax Lab 300p (plus) is the third machine in SCM’s Universal Combination Machine series. It is aimed at hobbyists and small professional workshops. It combines a sliding table saw, spindle moulder / wood shaper, and jointer-planer in one machine. Additionally a mortising table can be fitted as well. Sold in Germany under the Holzkraft brand.

It is built on a similar base as the Minimax SC 2 Classic sliding table saw, and the Minimax ST 3 Classic Saw/Spindle combination. It is a step higher in quality than the Minimax C 26 Genius and C 30 Genius. Its larger brother is the Minimax CU 300 Classic.

There are many upgrades available for all functions of the machine. Some of the most important are the upgrades to the cutterblock of the jointer planer. This can be upgraded to Tersa, or SCM’s own Xylent spiral cutterblock, for longer lasting and quieter blades.

Another upgrade that seems very useful is the additional fence for the jointer-planer, which means you won’t have to spend time resetting the fence every time you switch between functions.


Find the lowest prices for the SCM Minimax Lab 300 Plus, updated daily

Price Hidden
Price Hidden

Prices last updated: 1 year(s) ago


Ask questions or share your experiences with the SCM Minimax Lab 300 Plus with others

  1. My 15 year old Lab300 has suddenly stopped. No obvious cause, just won’t switch on. Any diagnostic suggestions, before I start taking things apart?

    Jacob Butler
    1 person found this helpful
    • Hi Jacob, I don’t have experience with this machine myself, so I’m not sure. But if it doesn’t switch on at all, it’s probably an electrical or motor issue.

  2. My question is there a over heat cut of switch on the lab 300 plus I was using the table saw for about a hour ripping timber and it just stopped I have checked all the micro switches and emergency stops I have plugged it out and back in and when doing so it clicks as usual but still no power to eader the saw /planer or the spindal moters

    Kevin Collins
  3. Sir Minimax lab 300+ ka India price kya hai reply my email address please.

    Sandeep Kumar
  4. Does this come with a scriber

  5. Do you now exactly dimensions of Minimax LAB 300 p

    Mladen Bozovic

Leave a comment

Your email address will not be published. Required fields are marked *

Detailed Specifications

All the specs and options for the SCM Minimax Lab 300 Plus

Total width2496 mm
Motor Voltage3x 400V 1x 230V
Motor Frequency50 or 60 Hz
Extra Features and Options
Tenoning table and protection hoodOption
Angular cutting device with flip-over stopsOption
Electric pre-setting and flip over support for feederOption
Additional support table for the sliding tableOption
Additional fence for the jointer planerOption
Cast iron mortiser and tableOption
Gravitational handwheel for planer tableOption
Wheel kitOption
Tersa cutterblock for the jointer-planerOption
Xylent spiral cutterblock for the jointer-planerOption
Self-centering chuck 0-16 mm “Wescott” type for the mortiserOption
Panel Saw
Maximum Ripping Width800 mm
Sliding Table Length1660 mm
Saw blade
Saw Blade Diameter315 mm
Maximum Cutting Height100 mm
Spindle Moulder
Max spindle height100 mm
Max bit width275 mm
Table dimensions1020 x 325 mm
Spindle speeds3500 / 7000 / 10.000
Planer Width300 mm
Max depth of cut3 mm
Table length450 mm
Max workpiece height220 mm
Feed rate(s)7m/min
Jointing width300 mm
Max depth of cut3 mm
Tables length1300 mm
Type of cutters3 Standard Blades / Tersa / Spiral
Fence tilt90-45°

Did you find an error in our data? Send me a message, and I'll update the page with your info.